Armstrong Satinkeeper® Resilient Low Gloss Floor Finish, 32 oz.
For Use On: Vinyl & Ceramic; Linoleum
Not for use on high gloss vinyl floors.
Directions For Initial Use:
- Sweep or Vacuum floor thoroughly.
- Wash with Armstrong Once 'n Done Floor Cleaner (not recommended for linoleum floors)
- Allow floor to dry.
- Apply a thin coat of Satinkeeper with a clean damp sponge mop or microfiber applicator mop.
- Coat entire surface.
- Allow floor to dry (approximately 30 minutes).
- Reappy Satinkeeper as needed to maintain shine. Only apply 1 - 2 coats at a time.
- If necessary, remove with Armstrong Floor Stripper & Cleaner (not recommended for linoleum floors)
Coverage: 1 Coat: 375 - 500 sq ft per quart.; 2 Coats: 187 - 250 sq ft per quart